Üstün ses özellikleri ve bağlanabilirliği ile olağanüstü bir mikrofon preamfi.TASCAM SERIES 8p Dyna, stüdyo ve sahne için mükemmel bir seçimdir.

Sağlam bir 1U raf montaj muhafazasına yerleştirilmiş çift S / MUX optik portu, onu TASATAM SERİSİ 102i veya SERIES 208i veya ADAT dahil diğer S / MUX donanımlı ses arayüzleri için mükemmel bir genişletme ünitesi yapar veya bir stand olarak kullanır.

Her SERIES 8p Dyna kanalı ayrıca, kondenser mikrofonlarıyla kullanım için ayrı ayrı anahtarlanmış + 48V fantom gücü ve gerçek bypasslı, kullanımı kolay, tek kontrollü bir analog kompresöre sahiptir. Ayrıca wordclock I / O, paralel olarak birden fazla ünite kullanırken veya diğer profesyonel ekipmanlarla çalışırken mükemmel senkronizasyon sağlar.

The front panel offers individually switched 48V phantom power as well as comprehensive metering via digital peak and level meters. The unit ships with its own power supply.

On the front of the unit, you'll find two combination XLR-1/4" input jacks for mic, line, or instrument usage. The rear provides six more XLR-1/4" combination jacks for line or microphone inputs. You'll also find eight 1/4" line outputs and a DB25 connector for all eight analog outputs. BNC wordclock I/O and optical ports are found on the rear as well.

 is a 1 RU rackmountable mic preamp with selectable analog compression on each channel, as well as low-noise preamps, dual S/MUX optical ports, and selectable +48V phantom power on a per-channel basis. Because of this, you can use the unit as an expansion device for S/MUX equipped interfaces, as a front-end for DANTE setups, or as a standalone front end.Tascam SERIES 8p DynaDesigned for studio and stage use, the 

Features at a Glance

• 8 HDIA (High Definition Instrumentation Architecture) microphone preamplifiers
• Single-knob analog compressor with true bypass, individually assignable to each input channel
• 2 front-panel instrument (Hi-Z)-microphone combo inputs
• 6 rear-panel balanced mic/line inputs
• Individually switched +48V phantom power per channel
• Dual S/MUX optical outputs: 8 channels at up to 96 kHz; 4 channels at 176.4 or 192 kHz (ADAT compatible)
• 8 line-level 1/4-inch balanced TRS analog channel outputs
• 8 line-level balanced channel outputs on a 25-pin D-Sub connector
• Wordclock in and out on BNC connectors, with In/Out/Thru switch
• Front-panel analog overload indicators, compression indicators, and digital peak and level meter bars
• Rugged metal 1U rackmount enclosure

TASCAM SERIES 8P DYNA Specs

Digital Specifications

Inputs

Outputs

Clock