Yamaha EMX5 12 Kanal 2x630 Watt Power Mikser

Outline

EMX5

I/O

Inputs

TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)

Phantom power

+48 V

Outputs

SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]

Control and others

FOOT SWITCH : Effect Mute on/off

Bus

Stereo: 1, AUX: 2 (Including FX)

Input Channel Function

PAD

30 dB (CH1-4)

Hi-Z

Supported (CH4)

HPF

80 Hz, -12 dB/oct. (CH1–3)

COMP

1-knob COMP (CH1–4)

EQ HIGH

10 kHz +15 dB / -15 dB (Shelving)

EQ MID

2.5 kHz +15 dB / -15 dB (Peaking)

EQ LOW

100 Hz +15 dB / -15 dB (Shelving)

On-board processors

DSP

SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ

On-board amplifiers

Maximum output power @4ohms

1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W

Maximum output power @8ohms

1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W

Level Meter

2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)

General specifications

EMX5

Frequency response

Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz

Total harmonic distortion

Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)

Hum & noise level

Equivalent input noise

-117 dBu (Noise is measured with A-weighting filter)

Residual output noise

Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)

Crosstalk

-85 dB (1 kHz, Measured with 1 kHz band pass filter)