Yamaha CL serisi, QL Serisi ve Nuage serisi dijital mikser dante uzak bağlantı için 16 kanal stage box, 8 çıkış
Yamaha's Rio1608-D 3U size digital stage box has 16 ins and 8 outs. The Rio Series I/O racks employ Dante network audio protocol for exceptional flexibility and freedom in setup and placement, while delivering natural, musical sound that brings out the full sonic potential of mixing consoles and other system components. They also allow redundancy for the utmost reliability in any application. Four models accommodate a wide range of I/O requirements.
Yamaha RIO1608-D Features:
Sonic performance that brings out the best in any system
Dante network protocol contributes to greater system scalability and flexibility
Support for CL series consoles as well as other Dante-based systems
Automatic digital-stage compensation for analog gain changes (CL series only)
Four models flexibly accommodate any system requirements
Yamaha RIO1608-D Specifications:
Sampling frequency rate
Internal: 44.1kHz, 48kHz, 88.2kHz, 96kHz
External:
44.1kHz (+4.1667%, +0.1%, -0.1%, -4.0%) ±200ppm
48kHz (+4.1667%, +0.1%, -0.1%, -4.0%) ±200ppm
88.2kHz (+4.1667%, +0.1%, -0.1%, -4.0%) ±200ppm
96kHz (+4.1667%, +0.1%, -0.1%, -4.0%) ±200ppm
Signal Delay: Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz
Total harmonic distortion OMNI IN to OMNI OUT Input Gain=Min.
Less than 0.05% 20Hz-20kHz @+4dBu into 600 Ohms, Fs=44.1kHz, 48kHz
Less than 0.05% 20Hz-40kHz @+4dBu into 600 Ohms, Fs=88.2kHz,96kHz
Frequency response
+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz
+0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz
Dynamic range: 108dB typ., INPUT to OUTPUT, Input Gain = Min.